Can Senzit be installed if I already have something installed on the port of the air filter housing?
Yes, the Senzit can be installed in addition to other devices currently installed on the air filter housing. Simply use a “T” fitting to have both products installed in parallel.
Should I replace my filter when I install the Senzit hardware?
Yes. Senzit learns the usage habits of your equipment and formulates individual algorithms customized to your machine and usage. Therefore, Senzit assumes that the filter is fresh when the hardware is installed. The initial use of an old filter as well as the failure to notify of either changing or cleaning the equipment’s air filter can negatively affect the performance of senzit.
Do I connect Senzit directly to the battery?
No. Due to the hardware broadcasting a cellular signal, the unit draws power. While the amount is small the hardware has the potential to drain a battery over an extended period. It is suggested to connect the Senzit hardware power lead to a fused switched ignition source.
Are there any concerns with heat damaging the housing/internals of the Senzit device when installed inside an engine housing?
The operating temperature of Senzit is -13°F to 176°F (-25°C to +80°C). However, Senzit should NOT be mounted on or next to hot air piping (e.g. near a turbo charger). Senzit must be installed on the low-pressure side of turbo/super chargers.